CQS-11GAL | Flush & Clean (Solvent-Based )
Product Features
- Removes debris and sludge from A/C components
- A/C flush solution that effectively cleans R-134a A/C systems
- Solvent-based
- Fast-drying – evaporates quickly
- Leaves no residue
Usage Directions
Usage Directions
- Preparation for Flushing:
- Reclaim refrigerant as required by EPA regulations
- All flushing container (6 to 12 oz. based on component to be cleaned)
- Disconnect hoses from A/C components
- Flush the following components with air pressure as the propellant: hoses, condenser and evaporator
- DO NOT FLUSH COMPRESSOR, EXPANSION VALVE, FILTER DRYER OR ACCUMULATOR
2. Flushing:
- Hold flushing nozzle into hose or component and continue to flush until Flush & Clean flows freely and cleanly
- After a one-minute wait, run nitrogen or dried filtered air through the hose or component
- Vacuum the system for a minimum of 30 minutes to insure the evaporation of residual flush solution
- After completion, flushing material must be disposed of in accordance with state, local and federal laws regarding chemical disposal
